Got the sailing season off to a great start on Saturday with the Opening Day Regatta at Fishing Bay Yacht Club sailing aboard the C&C37 Wavelength. We did one 12.5 mile race out around the channel buoys to the entrance of the Rappahannock River and back. We did some great sailing which included a spinnaker peel and managed to finish 2nd in some very close racing – only 36 seconds separated the top 4 boats on corrected time. Results and Pictures.
Here’s the video from Grace & Adrien’s wedding back at the end of February. The end shows a bit how this image was created.
Yesterday I had the pleasure of attending the wedding of Jen and Joseph along with a few good sailing friends. Here are a few photos:
Getting my Laser ready for the spring and I’ve found that an ant colony has taken up residence on it.
After standing on the sidelines for 3 years cheering on friends and family I finally joined the 30,000 people who signed up and ran the Monument Avenue 10k. Here’s my time and some pictures of running in the rain.
Here I am running the 2012 Ukrops Monument Avenue 10k Presented by Martins.
With all the driving I do for sailing and ECU football I’ve really wanted a new car with a little more space and better mileage than the focus was getting. I knew a 2012 Diesel VW Jetta SportWagen with a manual transmission and a sunroof was the perfect car. After a big of digging I found one in Charlottesville. I’m really looking forward to being able to cartop the Laser to some distant regattas in Massachusetts and Long Island this spring and avoid the tolls.
On March 4 I shot this film in Annapolis with the Severn Sailing Association Laser Fleet. I was on the committee boat with a camera and then we had 5 GoPro cameras on various boats getting footage. Thanks to Dorian, Luke, Eric, Carlos, Reid and Bob for helping out!
This GoPro mast mount should work for all mast sizes from a Laser on up. It was modeled after a mount seen on Layline’s website. On a Laser the mount can be used to film what’s ahead, or by putting it to the side and using some extenders can point backwards towards the cockpit. Obviously the mast rotation will result in some less than ideal shooting angles some of the time.
I used an Easy on/off bracket mast mount, but instead of using a stick-on or tripod mount, I drilled out the bracket part of a helmet mount and used two stainless steel bolts to attach it. The other solutions are probably sufficient, but I wanted something that would be bullet proof as I see myself mounting this in some places that I couldn’t exactly get to in a pinch if something went wrong.
 Mounted on a Laser mast pointed forward |  View pointed forward |
Parts Needed:
| Tools Needed:
|
Easy on/off bracket and GoPro Helmet Mount with an extra hole drilled in the v-mount for the mount.
GoPro Helmet mount mounted to the easy on/off bracket.
From the back showing the screws cut to the proper length with a hack saw so they didn’t protrude toward the mast any further.
Finished bracket mounted on a Laser mast with Velcro straps which were wrapped around the mast 3-4 times.
Just wanted to get one picture posted from this afternoon’s wedding of Grace and Adrien at the Clover Forest Plantation. Credit to Keith Andes for the idea to do this. Here’s the video.
